2019年8月29日星期四

Determining a margin of error in an inspection is the job of machine vision systems manufacturers

A production line would not be complete if it did not have an area that determined whether the final result is good or if it should be discarded.
Performing a visual inspection of all the parts within a production line is a task that many visual inspection machines currently carry out, and since the arrival of these, the production process has been simplified and shortened, giving very productive results and fast, but this is achieved after an exact study of what you want to achieve and what will be done to reach that goal.
Those who bring the system of visual inspection machines to life must take into account many elements of observation and study.
Machine vision systems manufacturers have many responsibilities, first of all to integrate all the elements so that they can give the best performance in terms of visual inspection, but not only physically they must work, but there are also other aspects that must take care .
In the imaging software, the parameters of interest must be configured to ensure that visual inspections are accurate.
Machine vision systems manufacturers must dictate to the imaging software all the parameters through which they will be guided to determine which parts are classified as suitable to continue the production process and also which do not meet the basic parameters to consider them functional.
It is important to make a perfect configuration of the margin of error since this will be responsible for discarding or classifying parts.
In order to classify a piece as unfit to continue in the production line, machine vision systems manufacturers must determine a characteristic called margin of error that is a fairly important element, since it completely directs the classification of the entire process.
When the system configurations are made, it should be determined which errors are shown as acceptable and which are not, but this can represent a fairly long process, because it is necessary to determine a step by step feature to consider, for example dark spots, cracks, dimensions Different in different directions, lack of parts.
There is also another important element and it is the meticulous selection of the areas that will be inspected specifically to determine errors since if attention is directed to areas that do not represent a crucial area to determine if a piece is within the acceptable parameters the risk is run of discarding any part due to a physical defect that does not really hinder its functions within the object where it will be installed.
The detection of errors, and in particular, the qualification of “error” given to some imperfections, must be oriented correctly, since each element counts, so it is important to establish clearly which elements will determine if a piece is perfect or enters the classification of functional elements. It is important to know in the first place the elements that would cause the piece to fail in operation, hence the specific characteristics that should be evaluated in the visual inspection could be derived.
For more about machine vision systems manufacturers,you can pay a visit to sipotek at https://www.topvision.net
About Shenzhen Sipotek Technology Co., Ltd
Started in 2002, Sipotek Technology is located in Shenzhen in China. The company designs and manufactures visual inspection systems with its avant-garde R&D department and a great experience in artificial vision technologies. Sipotek is a professional machine vision inspection system manufacturer from china.The Sipotek Technology staff supports customers 360 degrees automatd optical inspection(AOI), from listening to their requests to the development of ambitious machines for quality control.
For Inquiries:
Contact Person: James Yuan
Tel: +86 18666216027
               https://www.sipotek.net


发帖者 时间： 没有评论:

2019年8月27日星期二

According to top machine vision systems manufacturers, what is the importance of good imaging software?

The set of elements and the functionality of each of them is what determines the result of the visual inspection.
Each of the elements that are involved in a visual inspection play a fundamental role, and this is well known by all machine vision systems manufacturers, which is why they are always working together with other people, for example with machine vision camera manufacturers to achieve a fairly clear and pure image and thus detect errors more quickly and accurately than was possible in the past.
There are some elements that are more linked to the result and customer requirements than others.
While it is true that there are many elements involved in visual inspection, there are some that together with the requirements of the clients become more decisive than others, for example, according to the needs that those interested in performing the visual inspection may have, machine vision systems manufacturers will configure the processes and machine vision camera manufacturers will place their devices, all in order to meet each of the objectives that have been proposed to them.
Image software is required that is capable of optimally processing the data it receives.
Many machine vision systems manufacturers know that image processing is quite decisive when defining what the results will be shown at the end, which is why it requires a fairly sophisticated software that is responsible for including or excluding parts under the established parameters, these are rarely included from machine vision camera manufacturers, so it became a common practice for machine vision systems manufacturers to develop image software.
What is an image software?
It is a program that is responsible for the processing and analysis of all the information collected by cameras and sensors contained in visual inspection machines. The program is responsible for being specific, taking measurements and discarding the parts that have damages that compromise their function, in this way you can quickly determine which pieces qualify as ideal and which do not, so you begin to classify all the information and also the pieces useful that remained of the whole process.
Previously using image software was a bit “primitive” due to the capabilities of the equipment.
The image software until a few years ago had not been allowed to be much faster due to the capacity of the equipment that supported the information traffic, however at present there are many computers that are able to work at a very high speed and store and handle a large amount of data, so it is much simpler to handle these processes today.
What is capable of running modern software?
The image software that is currently being developed is capable of executing in a very precise way a large list of comparison and classification tasks, and you can really program it to do almost anything, that is why the development of a program like this Within a visual inspection is decisive for the results, all machine vision systems manufacturers take this into account.
For more about imaging software,you can pay a visit to top machine vision systems manufacturers at https://www.topvision.net
发帖者 时间： 没有评论:

2019年8月23日星期五

Machine vision camera system inspection manufacturers or automated optic...



https://www.topvison.net https://www.sipotek.net Machine vision camera system inspection manufacturers or automated optical inspection supplier from china
发帖者 时间： 没有评论:

2019年8月22日星期四

What function does presence verification perform on a visual inspection machine?

The visual inspection covers many fields, and is that not only is it a device that captures images of a material from different angles and in high resolution, but also has multiple functions linked to its main objective which is the detection of anomalies in a specific object.
A visual inspection machine must be able to alert the system when it finds a fault, and this is only possible through a vision control system for each of the products that are in the final stage, thus ensuring quality and the functionality of it.
Within a visual inspection machine there are several work areas that meet specific objectives.
There are well-established functions that are responsible for ruling out specific problems, and each must show the user every problem that may result from the review. The system consists of several parts so that together they can complete the visual review successfully.
One of the elements that plays a fundamental role and makes a visual inspection machine completely efficient is the verification of presence; upon hearing the term, many think that it is about whether the system is able to detect if there is a material or not on the platform for the review, but it is much more.
The verification of presence is one of the most important elements in visual inspections.
A visual inspection machine conserves different functions and the presence verification is extremely important since through this we can determine if any object, that does not correspond to the piece together with the specifications of the client, is inside it. The presence of objects foreign to the structure of the piece analyzed is more common than is believed, for this and many reasons this function was developed for these machines.
The verification of presence is in charge of confirming if inside the product there are elements such as screws, springs, or other pieces that should not be in that place, this is its most obvious function; but the reality is that this function is responsible for verifying if each of the components of the piece is in place.
There are also products that must be verified after they have been packaged, this stage of the process corresponds to the verification of presence.
Many times, due to the speed at which a product is created and assembled, some pieces may not fit quite well, including some of these may be missing, seriously compromising the structure of the material being examined.
This function can not only verify parts in which the assembly is visible and superficial, but can also validate if there are anomalies in materials that are already packaged. This function was added because there are companies that must include the assembly in their production line before passing the objects for review.
For every need of a customer there is a solution that only the best manufacturers of visual inspection machines can offer. Whether or not the product is packaged, the machines will be able to detect the presence or absence of materials within it.
For more about machine vision inspection system manufacturer,you can pay a visit to sipotek website at https://www.sipotek.net
About Shenzhen Sipotek Technology Co., Ltd
Started in 2002, Sipotek Technology is located in Shenzhen in China. The company designs and manufactures visual inspection systems with its avant-garde R&D department and a great experience in artificial vision technologies. Sipotek is a professional machine vision inspection system manufacturer from china.The Sipotek Technology staff supports customers 360 degrees automatd optical inspection(AOI), from listening to their requests to the development of ambitious machines for quality control.
For Media Inquiries:
Contact Person: James Yuan
Tel: 86-755-36994123
               https://www.topvision.net


发帖者 时间： 没有评论:
订阅： 博文 (Atom)